Emilio dropped off some SS tail pipes that had been cutoff and he asked if I could put them on his car. The first order of business was to clean up the old ones. I had to cut them and then remove the pieces of pipe that were slip fit into the tail pipes.
Once those were out I had to cut off the old pieces of exhaust hanger and clean the old welds off. They came out pretty good.
Here are the pipes after being cleaned up. I did that with an eraser.![Smile :) :)](/styles/default/xenforo/smilies/smile.png)
Here is a quick shot of the old driver's side pipe. Note the angle of the dangle.
Old tails were marked and cut.
Once they were cut off I had to cut the old hangers off, so I could reuse them on the new SS pipes.
Then it was time to weld them on.
Finished. I think they look good. Time for Emilio to get out the never dull and polish them up!
![](http://i533.photobucket.com/albums/ee335/orange395w/WMD%20Racing%20Fabrication%20pics/DSCN2041_zpsfaf2df4f.jpg)
Once those were out I had to cut off the old pieces of exhaust hanger and clean the old welds off. They came out pretty good.
![](http://i533.photobucket.com/albums/ee335/orange395w/WMD%20Racing%20Fabrication%20pics/DSCN2043_zps1ad22ca6.jpg)
![](http://i533.photobucket.com/albums/ee335/orange395w/WMD%20Racing%20Fabrication%20pics/DSCN2045_zps5efb484d.jpg)
Here are the pipes after being cleaned up. I did that with an eraser.
![Smile :) :)](/styles/default/xenforo/smilies/smile.png)
![](http://i533.photobucket.com/albums/ee335/orange395w/WMD%20Racing%20Fabrication%20pics/DSCN2046_zps9966c166.jpg)
Here is a quick shot of the old driver's side pipe. Note the angle of the dangle.
![](http://i533.photobucket.com/albums/ee335/orange395w/WMD%20Racing%20Fabrication%20pics/DSCN2047_zpsc0c76efa.jpg)
Old tails were marked and cut.
![](http://i533.photobucket.com/albums/ee335/orange395w/WMD%20Racing%20Fabrication%20pics/DSCN2048_zpsebc87b9c.jpg)
![](http://i533.photobucket.com/albums/ee335/orange395w/WMD%20Racing%20Fabrication%20pics/DSCN2050_zpsa4b3b9ad.jpg)
![](http://i533.photobucket.com/albums/ee335/orange395w/WMD%20Racing%20Fabrication%20pics/DSCN2055_zps2ccad781.jpg)
Once they were cut off I had to cut the old hangers off, so I could reuse them on the new SS pipes.
![](http://i533.photobucket.com/albums/ee335/orange395w/WMD%20Racing%20Fabrication%20pics/DSCN2051_zpsacaf6fcc.jpg)
Then it was time to weld them on.
![](http://i533.photobucket.com/albums/ee335/orange395w/WMD%20Racing%20Fabrication%20pics/DSCN2052_zpsef62b382.jpg)
Finished. I think they look good. Time for Emilio to get out the never dull and polish them up!
![](http://i533.photobucket.com/albums/ee335/orange395w/WMD%20Racing%20Fabrication%20pics/DSCN2054_zpsf413ee3b.jpg)